北京艺辉世纪数码科技有限公司LOGO
1145844次访问 | 设为首页 | 加入收藏

美国JK AUDIO THAT-2

时间:2016/12/6 13:22:35 (点击:661次)

美国JK AUDIO   THAT-2

Tap Your Phone with XLR Jacks.

Connect THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-2 is used by radio stations to record and play sound bytes, and by TV and film sound crews to get IFB dialog over phone lines.

美国JK AUDIO THAT-2

Record and Play Audio Clips

Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone. Now connect your audio equipment or powered speaker to the RCA or XLR jacks. The grey pushbutton selects which audio will be sent into the telephone (Out = talking on the handset, In = sending audio in through the RCA jack). The output jacks contains a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad.

Phone Compatibility

The THAT-2 has a three-position switch which accommodates electret, dynamic and carbon telephone handset microphone types. The THAT-2 will emulate the type of microphone that is in the handset and allow you to send audio into many different types of analog and digital PBX sets, as well as ISDN telephones. THAT-2 does not work with cordless or cell phones, or any telephone with a keypad in the handset.

Specifications
Line Input RCA
Impedance 600-9000 ohms
Level 250 mV RMS (+12 dBu nom)
Line Input Female XLR
Impedance 600-9000 ohms
Level 250 mV RMS (+12 dBu nom)
Output RCA
Impedance 0-2500 ohms
Level 100 mV RMS (-18 dBu nom)
Output Male XLR
Impedance 0-2500 ohms
Level 100 mV RMS (-18 dBu nom)
Misc
Handset Type Electret, Dynamic, Carbon
Size 4.5" x 3.2" x 1.3" (11.4 x 8.2 x 3.3 cm)
Weight 9 oz

版权所有:北京艺辉世纪数码科技有限公司 

ICP备案号:15065867 

  电话:010-82401448  82403440  电子信箱:innkeeper_china@163.com 

技术支持诚顺网建